• umpjunk@gmail.com
  • 210-364-1110

Click for updated Shipping info


Robic SC-522 Timer


  • Counts up or down
  • Breakaway lanyard
  • Select time in seconds or minutes
  • Lock function
  • Automatic reset
  • Use one timer to count down to zero; select time in seconds or in minutes
  • Automatically resets to preset time at completion; Stop & restart for time-outs
  • Lock Function protects the current reading which is entered
  • Breakaway Safety Lanyard helps prevent accidents, promotes safe use


Robic SC-522 setting operation for 90 seconds into Countdown Timer Countdown from 120 seconds. ? The time will appear as 02.00 or Two minute:)) seconds; with the time value set at all zeros, press A to select minutes and seconds (the colon “:” appears). Enter the time by pressing and holding A > 3 seconds. The digit on the far right appears flashing…set it to zero (0) pressing C until 0 appears. Then, press A again to set the second digit from the right. Press C to advance to 3 Press A again and then C advance the digit to the immediate left of the colon to 1 Press D to load your time and exit the setting process. After entering the preset time, press C to start counting down. You may press C to stop (STOP appears) and restart the timing as required. If the Beep tone is active, single Pre-alert beeps sound with 30, 3, 2 and 1 seconds remaining. Upon completion, the SC-522 will sound a rapid beep tone and reset to the preset time. Pre-Alert and Completion time beep tones always sound whether Silent or Beep Tone

Additional information

Weight 0.5 lbs
Dimensions 1 × 6 × 9 in